ngHobbies
HIMAX CR3516-1030 CONTRA ROTATING MOTORS
| Weight | 275g, (9.7oz) with prop adapter |
| Max Power | 400W, (This is dependent on several factors) |
| Max RPM | 12,000 RPM |
| Diameter | 35.3mm, (1.39") |
| Length | 34mm(1.34") |
| Shaft Diameter | 4.73mm (3/16") front shaft, 9.48mm (3/8") rear shaft |
| Motor Mounting Holes | 4 holes, 3.17mm through, on 43mm, (1.7") bolt circle |
| Maximum Case Temperature | 65oC, (149oF) |
| Suggested Props | For 3-cell operation APC 12x6P front prop, APC 11x8E rear prop |
| Battery | 3-cell Lipo that can sustain 70 to 80 amp continuous draw. |
| ESC setting | Cutoff - soft, Brake - disabled, Throttle type - airplane, fixed endpoints. |
Features:, High Efficiency - High Power - High Torque - Lightweight - Equivalent to .30 size glow engine., Specifications:, ESC: Two Phoenix 35 or equivalent. Also needs a MPI 2160 or 2460 Y-harness to join the two ESC to throttle channel., Special note:,
KV= 1030, Rm = .0.035, Io = TBA Efficient Operating ...ngHobbies
HITECH HS-50 SUPER FEATHER SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, None, Speed:, 0.09 @ 60 deg., Torque:, 8.33 / NA oz.in (4.8v only), Size:, 0.82" x 0.44" x 0.86", Weight:, 0.22oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
The name says it all! The HS-50, Super Feather Servo ...ngHobbies
REMZIBI OSD 3DR
| This version of the board has an error on the bottom silk screen labels | the board currently reads |
| Board measurements | 1.6 in x 1.1 in ( 4cm x 2.7cm) |
| NOTE | This product is not compatible with the APM 2.0. |
NOTE:,
One of the most versatile OSD systems is available now ...ngHobbies
HITECH HS-56HB DELUX FEATHER SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, Top Ball Bearing, Speed:, 0.12 / 0.10 sec @ 60 deg., Torque:, 13.88 / 16.66 oz.in (4.8v/6v), Size:, 0.88" x 0.45" x 0.94", Weight:, 0.37oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
The HS-56HB Feather Servo is the perfect choice for larger ...ngHobbies
HITECH HS-55 FEATHER SERVO
Detailed Specifations:, Motor Type:, Coreless, Bearing Type:, None, Speed:, 0.17 / 0.14 sec @ 60 deg., Torque:, 15 / 18 oz.in (4.8v/6v), Size:, 0.89" x 0.45" x 0.94", Weight:, 0.28oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
The HS-55 set the standard for affordable performance, offering precision ...ngHobbies
MIKROKOPTER BRUSHLESS OUTRUNNER MK3638
| •Lithium cell count | 3-6 |
| •Load current | max. 20A |
| •Maximum load current. (60 sec) | 25 A |
| •No-load speed | 770 rpm / V |
| •Recommended Propeller Size | 10" .. 14" |
| •Machanical power | 350 W |
| •Thrust max. | 2200 g |
| •Wire length | about 52 cm |
| •Total weight (without cable) | approx 100g |
| •Dimensions | h=35mm, d=38mm |
| •Shaft diameter | 4 mm |
Technical Data:,
This is a 14 pole brushless outrunner motor with high ...ngHobbies
REMZIBI OSD PACKAGE
| - Supply power requirement | 7V-14V (ie |
| - Weight | 16 gram (OSD + dedicated GPS) |
Technical Data:, Functionality:, - PC connection for configuration/calibration purposes using dedicated PC program, Button function:, - Save home position (short click), Information currently available on the OSD (additional hardware may be required):, - Latitude (format DDMM.MMMM or DD.DDDDDD can be choosen), Documentation:, English Documentation, Software:, Click here, Support forum:, Click here,
Remzibi's OSD is an On-Screen-Display unit that is used along ...ngHobbies
40 MW 2.4GHZ FATSHARK TRANSMITTER
Note:, The use and operation of this product in most states, countries may require a HAM or Amateur radio license. New Generation Hobbies cannot be held responsible for your actions if you use this product without proper licensing., Important note for US and Canada customers:, Please note: channel 4 of this transmitter is outside of the allowed frequency spectrum for US and Canada. These channels cannot be legally used even if you have a Radio Amaterur or HAM license. Please make sure that you obey your countries rules and regulations around use of these devices and use them only on channel 1,2 or 3. New Generation Hobbies cannot be held responsible for using these transmitters on channels which are outside of the legal allowed frequency ranges.,
This is the 40mW Fatshark Transmitter which usually comes with ...ngHobbies
MEDIATEK MT3329 GPS V2.0
| High sensitivity | Up to -165dBm tracking, superior urban performance |
| Maximum update rate | up to 10Hz (optional by firmware) |
| Support AGPS function ( Offline mode | EPO valid up to 14 days ) |
| Weight | 0.33oz; 9.45 g |
Resources:, -DataSheet,
This revision features a new board layout with an improved ...ngHobbies
QUADRO2 XL COMBI ASSEMBLED DISTRIBUTION BOARD
| • voltage | 10 to 30V -> 3 -7S Lipo |
| • current | up to 60A (per BL-Unit) and 120A (all together) with appropriate cooling |
| • Silent Start | test tone at startup can be disabled |
| • hole | 3mm |
| • weight | ca. 109g |
IMPORTANT:, Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki !, : The BL-Ctrl 3.0 controller is specifically designed and optimized for our motors. For maximum stability of the MikroKopter set-points are set almost instantaneously on the motor. If other motors (especially larger power classes) are used with this controller, this fast change of set-points can easily lead to very high peak currents, which bring the BL-Ctrl control to the limit or an overload. This is no fault of BL-Ctrl3.0 controller, but a systemic property., Power:, Mechanical data:, , • Dimensions (W x H ):, In the package:, • 2 SMD preassembled, programmed and tested boards already mounted and soldered, Links:,
4 ESCs on two boards! Extremely fast brushless controllers version ...ngHobbies
OKTO XL COMBI ASSEMBLED DISTRIBUTION BOARD
| • voltage | 10 to 30V -> 3 -7S Lipo |
| • current | up to 60A (per BL-Unit) and 120A (all together) with appropriate cooling |
| • Silent Start | test tone at startup can be disabled |
| • hole | 3mm |
| • weight | ca. 109g |
IMPORTANT:, Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki !, : The BL-Ctrl 3.0 controller is specifically designed and optimized for our motors. For maximum stability of the MikroKopter set-points are set almost instantaneously on the motor. If other motors (especially larger power classes) are used with this controller, this fast change of set-points can easily lead to very high peak currents, which bring the BL-Ctrl control to the limit or an overload. This is no fault of BL-Ctrl3.0 controller, but a systemic property., Power:, Mechanical data:, , • Dimensions (W x H ):, In the package:, • 2 SMD preassembled, programmed and tested boards already mounted and soldered, Links:,
8 ESCs on two boards! Extremely fast brushless controllers version ...ngHobbies
DOUBLE QUADRO 2XL - COMBI
| • voltage | 10 to 30V -> 3 -7S Lipo |
| • current | up to 60A (per BL-Unit) and 120A (all together) with appropriate cooling |
| • Silent Start | test tone at startup can be disabled |
| • hole | 3mm |
| • weight | ca. 109g |
IMPORTANT:, Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki !, : The BL-Ctrl 3.0 controller is specifically designed and optimized for our motors. For maximum stability of the MikroKopter set-points are set almost instantaneously on the motor. If other motors (especially larger power classes) are used with this controller, this fast change of set-points can easily lead to very high peak currents, which bring the BL-Ctrl control to the limit or an overload. This is no fault of BL-Ctrl3.0 controller, but a systemic property., Power:, Mechanical data:, , • Dimensions (W x H ):, In the package:, • 2 SMD preassembled, programmed and tested boards already mounted and soldered, Links:,
8 ESCs on two boards! Extremely fast brushless controllers version ...ngHobbies
DOUBLE QUADRO V3 - COOL
| • voltage | 10 to 30V -> 3 -7S Lipo |
| • current | up to 60A (per BL-Unit) and 120A (all together) with appropriate cooling |
| • Silent Start | test tone at startup can be disabled |
| • hole | 3mm |
| • weight | ca. 109g |
IMPORTANT:, Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki !, : The BL-Ctrl 3.0 controller is specifically designed and optimized for our motors. For maximum stability of the MikroKopter set-points are set almost instantaneously on the motor. If other motors (especially larger power classes) are used with this controller, this fast change of set-points can easily lead to very high peak currents, which bring the BL-Ctrl control to the limit or an overload. This is no fault of BL-Ctrl3.0 controller, but a systemic property., Power:, Mechanical data:, , • Dimensions (W x H ):, In the package:, • 2 SMD preassembled, programmed and tested boards already mounted and soldered, Links:,
8 ESCs on two boards with extra cooling through assembled ...ngHobbies
SINGLE BL-CTRL V3.0 2XL
| IMPORTANT | Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki ! |
| •voltage | 10 to 30V -> 3 -7S Lipo |
| • current | up to 60A with appropriate cooling |
| • Silent Start | test tone at startup can be disabled |
| • hole | 3mm |
| • Dimensions (W x H ) | approx 75mm x 26mm (without capacitors) |
| • Dimensions (W x H ) | approx 96mm x 26mm ( with capacitors) |
| • weight | 15g (with capacitors) |
Note: The BL-Ctrl 3.0 controller is specifically designed and optimized for our motors. For maximum stability of the MikroKopter setpoints are set almost instantaneously on the motor. If other motors (especially larger power classes) are used with this controller, this fast change of setpoints can easily lead to very high peak currents, which bring the BL-Ctrl control to the limit or an overload. This is no fault of BL-Ctrl3.0 controller, but a systemic property., This new version has the following features:, Dimensions:, The following items are included in this kit:,
Extremely fast brushless controller version V3 for any MikroKopter with ...